PartsTable
Technical Data Sheet

MIL-H-10056/9 — HOLDER,QUARTZ CRYSTAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MIL-H-10056/9: HOLDER,QUARTZ CRYSTAL.

The HOLDER,QUARTZ CRYSTAL is a the manufacturer industrial component. Key specifications include body_length: 0.500 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN, overall_width: 0.408 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN, terminal_length: 1.500 INCHES NOMINAL IN, style_designator: RECTANGULAR BODY, PIN TERMINALS, overall_thickness: 0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN, terminal_diameter: 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5955-00-247-8627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-10056/9
NSN: 5955-00-247-8627
FSC: 5955 — Oscillators and Piezoelectric Crystals
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_length0.500 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
overall_width0.408 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN
terminal_length1.500 INCHES NOMINAL IN
style_designatorRECTANGULAR BODY, PIN TERMINALS
overall_thickness0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
terminal_diameter0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
crystal_plate_quantity_accommodated1
center_to_center_distance_between_terminals0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
NSN5955-00-247-8627
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available HOLDER,QUARTZ CRYSTAL TITLE COMPONENT PN MIL-H-10056/9 MFR HOLDER,QUARTZ CRYSTAL
KEY FEATURES
•
TERMINAL DIAMETER: 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
TERMINAL LENGTH: 1.500 INCHES NOMINAL IN
•
OVERALL THICKNESS: 0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR BODY, PIN TERMINALS
•
BODY LENGTH: 0.500 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS: 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-H-10056 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TECHNICAL CHARACTERISTICS
TERMINAL DIAMETER0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
TERMINAL LENGTH1.500 INCHES NOMINAL IN
OVERALL THICKNESS0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR BODY, PIN TERMINALS
OVERALL WIDTH0.408 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN
BODY LENGTH0.500 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-H-10056 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CRYSTAL PLATE QUANTITY ACCOMMODATED1
SUBSTITUTES & CROSS-REFERENCES 3
182-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
XX1045/03/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
HC18UReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MIL-H-10056/9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-10056/9?
MIL-H-10056/9 is a HOLDER,QUARTZ CRYSTAL.
What parts can replace MIL-H-10056/9?
There are 3 known substitutes for MIL-H-10056/9: 182-001, XX1045/03/1, HC18U. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-10056/9?
MIL-H-10056/9 is cataloged in the U.S. Government catalog under NSN 5955-00-247-8627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-10056/9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.