PartsTable / COMPONENT / MIL-G-1149 REV C TY 2 CL 1
MIL-G-1149 REV C TY 2 CL 1✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, center_hole_diameter: 2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, supplementary_features: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200, nondefinitive_spec/std_data: 2 TYPE AND 1 CLASS. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-911-6267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-G-1149 REV C TY 2 CL 1
NSN:5330-00-911-6267 FSC:5330 CAGE:81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
special_features
STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
center_hole_diameter
2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM IN
cross-sectional_height
0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
supplementary_features
CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
nondefinitive_spec/std_data
2 TYPE AND 1 CLASS
NSN
5330-00-911-6267
COMPONENT DIAGRAM
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM IN
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 1 CLASS
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES
STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
CENTER HOLE DIAMETER
2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM IN
SUPPLEMENTARY FEATURES
CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-G-1149 REV C TY 2 CL 1?
MIL-G-1149 REV C TY 2 CL 1 is a GASKET.
What parts can replace MIL-G-1149 REV C TY 2 CL 1?
There are 16 known substitutes for MIL-G-1149 REV C TY 2 CL 1: AS568B-007, 2-7C147-7, M1149,TY1,CL2, .375"X36"X8YD and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-G-1149 REV C TY 2 CL 1?
MIL-G-1149 REV C TY 2 CL 1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-911-6267. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.