PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-F-24787/1 GROUP X, TYPE F

MIL-F-24787/1 GROUP X, TYPE F — Technical Data Sheet

✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

ADAPTER,STRAIGHT,SWIVEL FLANGE T. Key specifications include material: COPPER ALLOY 903 FLANGE, unable_to_decode: UNABLE TO DECODE, nominal_thickness: 0.940 INCHES FIRST END IN, flange_face_design: RAISED SWIVEL FIRST END, operating_pressure: 900.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_overall_length: 4.860 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 4730-01-113-7851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-F-24787/1 GROUP X, TYPE F
NSN: 4730-01-113-7851
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY 903 FLANGE
unable_to_decodeUNABLE TO DECODE
nominal_thickness0.940 INCHES FIRST END IN
flange_face_designRAISED SWIVEL FIRST END
operating_pressure900.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_overall_length4.860 INCHES IN
nominal_outside_diameter6.620 INCHES FIRST END IN
bolt_hole_nominal_diameter0.690 INCHES FIRST END IN
raised_face_nominal_height0.062 INCHES FIRST END IN
nondefinitive_spec/std_dataA11 TYPE AND 48 SIZE
specification/standard_data81349-MIL-H-24136 GOVERNMENT SPECIFICATION
bolt_circle_nominal_diameter5.500 INCHES FIRST END IN
NSN4730-01-113-7851
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MIL-F-24787/1 GROUP X, TYPE F · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THICKNESS: 0.940 INCHES FIRST END IN
•
MATERIAL: NICKEL ALLOY BOLT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286,CLASS A OR CLASS B COLD DRAWN FED SPEC SINGLE MATERIAL RESPONSE NUT
•
RAISED FACE NOMINAL DIAMETER: 4.500 INCHES FIRST END IN
•
UNABLE TO DECODE: UNABLE TO DECODE
•
NONDEFINITIVE SPEC/STD DATA: A11 TYPE AND 48 SIZE
TECHNICAL CHARACTERISTICS
NOMINAL THICKNESS0.940 INCHES FIRST END IN
MATERIALNICKEL ALLOY BOLT
MATERIALCOPPER ALLOY SOCKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286,CLASS A OR CLASS B COLD DRAWN FED SPEC SINGLE MATERIAL RESPONSE NUT
RAISED FACE NOMINAL DIAMETER4.500 INCHES FIRST END IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286,CLASS A OR CLASS B COLD DRAWN FED SPEC SINGLE MATERIAL RESPONSE BOLT
UNABLE TO DECODEUNABLE TO DECODE
NONDEFINITIVE SPEC/STD DATAA11 TYPE AND 48 SIZE
NOMINAL OUTSIDE DIAMETER6.620 INCHES FIRST END IN
BOLT CIRCLE NOMINAL DIAMETER5.500 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
4730PL1340532InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
19-02-1608InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MILH24136InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-F-24787/1 GR X, TY F, CL IIIInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
MIL-DTL-24787/1InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
MIL-F-24787/1InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-F-24787/1 GROUP X, TYPE F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-F-24787/1 GROUP X, TYPE F?
MIL-F-24787/1 GROUP X, TYPE F is a ADAPTER,STRAIGHT,SWIVEL FLANGE T.
What parts can replace MIL-F-24787/1 GROUP X, TYPE F?
There are 8 known substitutes for MIL-F-24787/1 GROUP X, TYPE F: 4730PL1340532, 19-02-1608, MILH24136 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-F-24787/1 GROUP X, TYPE F?
MIL-F-24787/1 GROUP X, TYPE F is cataloged in the Federal Logistics Information System under NSN 4730-01-113-7851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-F-24787/1 GROUP X, TYPE F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026