The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION, temp_rating: 275.0 FAHRENHEIT DEGF, overall_width: 1.500 INCHES NOMINAL IN, special_features: CUSHION HAS A WEDGE; INCLUDES A STIFFENING BEAD; CUSION COLOR IS PURPLE; TEMPERTURE RANGE IS -65 TO + 275 DEG F DEGF, style_designator: SINGLE LOOP. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-239-2684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-DTL-85052/2
NSN:5340-01-239-2684 NIINs:012392684, 012806160, 012836620, 012836622, 012836623, 012953083, 014226849, 014376201, 014376206, 014425020, 015194050, 015194051, 015224755, 015766922, 015766941, 015797118 FSC:5340 — Hardware, Commercial CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter
0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION
temp_rating
275.0 FAHRENHEIT DEGF
overall_width
1.500 INCHES NOMINAL IN
special_features
CUSHION HAS A WEDGE; INCLUDES A STIFFENING BEAD; CUSION COLOR IS PURPLE; TEMPERTURE RANGE IS -65 TO + 275 DEG F DEGF
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE BAND
material_thickness
0.020 INCHES NOMINAL IN
loop_inside_diameter
1.500 INCHES NOMINAL IN
end_item_identification
G92SAW
specification/standard_data
81349-MIL-C-85052/2 GOVERNMENT SPECIFICATION
NSN
5340-01-239-2684
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT AND HYDRAULIC FLUID AND OZONE RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.717 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION
HEAT AND HYDRAULIC FLUID AND OZONE RESISTANT
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE BAND
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-85052/2?
MIL-DTL-85052/2 is a CLAMP,LOOP.
What parts can replace MIL-DTL-85052/2?
There are 2 known substitutes for MIL-DTL-85052/2: M85052/2-3, MIL-C-85052/2. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-85052/2?
MIL-DTL-85052/2 is cataloged in the U.S. Government catalog under NSN 5340-01-239-2684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.