MIL-DTL-83798/6 — Technical Data Sheet

✓ Verified by PartsTable

— · HOSE FITTING

WHAT YOU NEED TO KNOW

PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape

NPT != BSPT — look identical, NOT interchangeable

PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: ALUMINUM ALLOY OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.156 INCHES NOMINAL FIRST END IN, seat_angle: 12.0 DEGREES FIRST END, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-087-1008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-DTL-83798/6

NSN: 4730-00-087-1008
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	ALUMINUM ALLOY OVERALL
flow_angle	90.0 DEGREES
leg_length	1.156 INCHES NOMINAL FIRST END IN
seat_angle	12.0 DEGREES FIRST END
thread_class	3B FIRST END
connection_type	THREADED INTERNAL TUBE FIRST END
connection_style	SWIVEL NUT, FLARELESS (SWIVEL NUT ATTACHMENT METHOD OPTIONAL) (TUBE) FIRST END
surface_treatment	ANODIZE OVERALL
operating_pressure	1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size	0.750 INCHES FIRST END IN
maximum_operating_temp	300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_series_designator	UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
NSN	4730-00-087-1008

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE

•

NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED: 0.938 INCHES SECOND END IN

•

THREAD QUANTITY PER INCH: 12 FIRST END

•

MATERIAL: ALUMINUM ALLOY OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: WW-T-700/4,ALLOY 5052 FED SPEC ALL MATERIAL RESPONSES OR WW-T-700/6,ALLOY6061,TEMPER T6,TYPE 1 FED SPEC ALL MATERIAL RESPONSES OVERALL

•

FLOW ANGLE: 90.0 DEGREES

•

SURFACE TREATMENT: ANODIZE OUTSIDE

TECHNICAL CHARACTERISTICS (FLIS)

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED	0.938 INCHES SECOND END IN
THREAD QUANTITY PER INCH	12 FIRST END
MATERIAL	ALUMINUM ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	WW-T-700/4,ALLOY 5052 FED SPEC ALL MATERIAL RESPONSES OR WW-T-700/6,ALLOY6061,TEMPER T6,TYPE 1 FED SPEC ALL MATERIAL RESPONSES OVERALL
FLOW ANGLE	90.0 DEGREES
SURFACE TREATMENT	ANODIZE OUTSIDE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
SURFACE TREATMENT	ANODIZE INSIDE
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT (UNJ) FIRST END

VERIFIED SUBSTITUTES & CROSS-REFERENCES 16

M83798/6-16Interchangeable