PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-DTL-641/10
MIL-DTL-641/10 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The MIL-DTL-641/10 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5935-00-234-1594, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-641/10
NSN: 5935-00-234-1594
FSC: 5935
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-DTL-641/10
NSN5935-00-234-1594
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MIL-DTL-641/10 TITLE COMPONENT PN MIL-DTL-641/10 MFR MIL-DTL-641/10
KEY FEATURES
•
SURFACE TREATMENT: TIN TERMINAL
•
TERMINAL TYPE: TAB, SOLDER LUG
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
FINGER ACCOMMODATION DIAMETER: 0.252 INCHES NOMINAL SINGLE FINGER IN
•
TEST DATA DOCUMENT: 81349-MIL-J-641 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
ACCOMMODATED FINGER TYPE: TWO CONDUCTOR, ROUND TIP SINGLE FINGER
•
FINGER ACCOMMODATION LENGTH: 1.015 INCHES NOMINAL SINGLE FINGER IN
•
JACK CONTACT ARRANGEMENT DESIGNATOR: J7
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTTIN TERMINAL
TERMINAL TYPETAB, SOLDER LUG
NOMINAL THREAD SIZE0.375 INCHES IN
FINGER ACCOMMODATION DIAMETER0.252 INCHES NOMINAL SINGLE FINGER IN
TEST DATA DOCUMENT81349-MIL-J-641 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
ACCOMMODATED FINGER TYPETWO CONDUCTOR, ROUND TIP SINGLE FINGER
FINGER ACCOMMODATION LENGTH1.015 INCHES NOMINAL SINGLE FINGER IN
JACK CONTACT ARRANGEMENT DESIGNATORJ7
MOUNTING HOLE DIAMETER0.156 INCHES NOMINAL IN
BODY WIDTH0.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
M499Interchangeable
interchangeable cross-reference
interchangeable
123207Interchangeable
interchangeable cross-reference
interchangeable
MC9A06Interchangeable
interchangeable cross-reference
interchangeable
JANJ641Interchangeable
interchangeable cross-reference
interchangeable
JJ037Interchangeable
interchangeable cross-reference
interchangeable
M443AJAXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-DTL-641/10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-641/10?
MIL-DTL-641/10 is a MIL-DTL-641/10.
What parts can replace MIL-DTL-641/10?
There are 18 known substitutes for MIL-DTL-641/10: M499, 123207, MC9A06 and 15 more. Substitute compatibility should be verified for your specific system.
Is MIL-DTL-641/10 still available?
MIL-DTL-641/10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-641/10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026