PartsTable
Technical Data Sheet

MIL-DTL-24646/10 — FILTER,BAND SUPPRESSION

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MIL-DTL-24646/10: FILTER,BAND SUPPRESSION.

The FILTER,BAND SUPPRESSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, overall_depth: 5.625 INCHES NOMINAL IN, overall_width: 15.375 INCHES NOMINAL IN, overall_height: 20.375 INCHES NOMINAL IN, mounting_method: BRACKET WITH HOLE, style_designator: RECTANGULAR, SURFACE MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 5920-00-028-3963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MIL-DTL-24646/10
NSN: 5920-00-028-3963
FSC: 5920 — Fuses, Arrestors, Absorbers, and Protectors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY
overall_depth5.625 INCHES NOMINAL IN
overall_width15.375 INCHES NOMINAL IN
overall_height20.375 INCHES NOMINAL IN
mounting_methodBRACKET WITH HOLE
style_designatorRECTANGULAR, SURFACE MOUNTING
unthreaded_mounting_hole_diameter0.531 INCHES NOMINAL IN
standard_mounting_pattern_designator3 POINT-TRIANGULAR
hazardous_locations/environmental_protectionSUBMERSIBLE-NEMA TYPE 6
center_to_center_distance_between_mounting_facilities_parallel_to_width12.000 INCHES NOMINAL IN
center_to_center_distance_between_mounting_facilities_parallel_to_height13.438 INCHES NOMINAL IN
NSN5920-00-028-3963
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available FILTER,BAND SUPPRESSION TITLE COMPONENT PN MIL-DTL-24646/10 MFR FILTER,BAND SUPPRESSIO
KEY FEATURES
•
MOUNTING METHOD: BRACKET WITH HOLE
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR, SURFACE MOUNTING
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 13.438 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH: 12.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT20.375 INCHES NOMINAL IN
MOUNTING METHODBRACKET WITH HOLE
UNTHREADED MOUNTING HOLE DIAMETER0.531 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR, SURFACE MOUNTING
OVERALL WIDTH15.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT13.438 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH12.000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
FUSE TYPE AND QUANTITY ACCOMMODATED12 CARTRIDGE FERRULE
STANDARD MOUNTING PATTERN DESIGNATOR3 POINT-TRIANGULAR
SUBSTITUTES & CROSS-REFERENCES 6
9000S6202-74172Reference document
Same NSN cross-reference
Reference document — Secondary reference
M24646/10-002Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
561-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
9000S6202-74172REV0Reference document
Same NSN cross-reference
Reference document — Secondary reference
9S4879LALT5Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-F-24646/10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MIL-DTL-24646/10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-24646/10?
MIL-DTL-24646/10 is a FILTER,BAND SUPPRESSION. It is classified as a MRO (MRO_GENERAL).
What parts can replace MIL-DTL-24646/10?
There are 6 known substitutes for MIL-DTL-24646/10: 9000S6202-74172, M24646/10-002, 561-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-24646/10?
MIL-DTL-24646/10 is cataloged in the U.S. Government catalog under NSN 5920-00-028-3963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-24646/10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.