PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-DTL-22240
MIL-DTL-22240 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, inside_diameter: 2.500 INCHES NOMINAL IN, outside_diameter: 3.124 INCHES NOMINAL IN, burst_test_pressure: 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS, inside_surface_condition: SMOOTH, media_for_which_designed: FUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-163-0217, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-22240
NSN: 4720-00-163-0217
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
inside_diameter2.500 INCHES NOMINAL IN
outside_diameter3.124 INCHES NOMINAL IN
burst_test_pressure600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE
hydrostatic_test_pressure300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
measuring_method_and_length420.000 INCHES NOMINAL OVERALL IN
specification/standard_data81349-MIL-H-22240 GOVERNMENT SPECIFICATION
layer_composition_and_location1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
outer_covering_environmental_protectionOZONE RESISTANT AND WATER RESISTANT
NSN4720-00-163-0217
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-DTL-22240 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR TUBE
•
HYDROSTATIC TEST PRESSURE: 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-22240 GOVERNMENT SPECIFICATION
•
INSIDE SURFACE CONDITION: SMOOTH
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF AND OXIDATION RESISTANT
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER RUBBER IMPREGNATED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALRUBBER CHLOROPRENE CLASS CR TUBE
HYDROSTATIC TEST PRESSURE300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81349-MIL-H-22240 GOVERNMENT SPECIFICATION
INSIDE SURFACE CONDITIONSMOOTH
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF AND OXIDATION RESISTANT
LAYER COMPOSITION AND LOCATION1ST LAYER RUBBER IMPREGNATED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
INSIDE DIAMETER4.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
H0S-22240-6A-420LInterchangeable
interchangeable cross-reference
interchangeable
2560-96Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-22240Interchangeable
interchangeable cross-reference
interchangeable
H0S-22240-7A-420LInterchangeable
interchangeable cross-reference
interchangeable
2560-7Interchangeable
interchangeable cross-reference
interchangeable
M22240-70AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-DTL-22240?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-22240?
MIL-DTL-22240 is a HOSE,NONMETALLIC.
What parts can replace MIL-DTL-22240?
There are 14 known substitutes for MIL-DTL-22240: H0S-22240-6A-420L, 2560-96, MIL-H-22240 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-22240?
MIL-DTL-22240 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-163-0217. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-22240

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026