PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-DTL-13531-10
MIL-DTL-13531-10 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.625 INCHES NOMINAL IN, outside_diameter: 1.062 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, special_features: MAXIMUM OPERATING PRESSURE AND MAXIMUM TEMPERATURE SHOULD NOT BE USED SIMULTANEOUSLY, operating_pressure: 2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-352-2282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-13531-10
NSN: 4720-01-352-2282
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.625 INCHES NOMINAL IN
outside_diameter1.062 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
special_featuresMAXIMUM OPERATING PRESSURE AND MAXIMUM TEMPERATURE SHOULD NOT BE USED SIMULTANEOUSLY
operating_pressure2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure11000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure5500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data2 TYPE AND A CLASS
specification/standard_data81349-MIL-H-13531 GOVERNMENT SPECIFICATION
NSN4720-01-352-2282
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-DTL-13531-10 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-13531 GOVERNMENT SPECIFICATION
•
INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
INSIDE SURFACE CONDITION: SMOOTH
•
MINIMUM INSIDE BENDING RADIUS: 8.000 INCHES IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA81349-MIL-H-13531 GOVERNMENT SPECIFICATION
INSIDE DIAMETER0.625 INCHES NOMINAL IN
HYDROSTATIC TEST PRESSURE5500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
CROSS-SECTIONAL SHAPE STYLEROUND
INSIDE SURFACE CONDITIONSMOOTH
MINIMUM INSIDE BENDING RADIUS8.000 INCHES IN
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
BURST TEST PRESSURE11000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NONDEFINITIVE SPEC/STD DATA2 TYPE AND A CLASS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
0568 9808Interchangeable
interchangeable cross-reference
interchangeable
13007Interchangeable
interchangeable cross-reference
interchangeable
150 GInterchangeable
interchangeable cross-reference
interchangeable
16703Interchangeable
interchangeable cross-reference
interchangeable
24210Interchangeable
interchangeable cross-reference
interchangeable
B7410064P1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-DTL-13531-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-13531-10?
MIL-DTL-13531-10 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MIL-DTL-13531-10?
There are 16 known substitutes for MIL-DTL-13531-10: 0568 9808, 13007, 150 G and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-13531-10?
MIL-DTL-13531-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-352-2282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-13531-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026