PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-DTL-1222, TYPE III
MIL-DTL-1222, TYPE III ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MIL-DTL-1222, TYPE III is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-386-9797, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-1222, TYPE III
NSN: 5310-01-386-9797
FSC: 5310
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-DTL-1222, TYPE III
NSN5310-01-386-9797
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MIL-DTL-1222, TYPE III · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
THREAD QUANTITY PER INCH: 8
•
THREAD CLASS: 2B
•
NOMINAL THREAD SIZE: 1.250 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
DEPARTURE FROM CITED DOCUMENTMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
CRITICALITY CODE JUSTIFICATIONZZZW
THREAD QUANTITY PER INCH8
THREAD CLASS2B
NOMINAL THREAD SIZE1.250 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MIL-DTL-1222 TYPE IIIL1Interchangeable
interchangeable cross-reference
interchangeable
655-8803PCF11L1Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-1222 GR500L1Interchangeable
interchangeable cross-reference
interchangeable
9/16-12UNC-2BL1Interchangeable
interchangeable cross-reference
interchangeable
803-2177525-M5XX-12Interchangeable
interchangeable cross-reference
interchangeable
803-2177525-M5XX-12L1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-DTL-1222, TYPE III?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-1222, TYPE III?
MIL-DTL-1222, TYPE III is a MIL-DTL-1222, TYPE III.
What parts can replace MIL-DTL-1222, TYPE III?
There are 26 known substitutes for MIL-DTL-1222, TYPE III: MIL-DTL-1222 TYPE IIIL1, 655-8803PCF11L1, MIL-DTL-1222 GR500L1 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-1222, TYPE III?
MIL-DTL-1222, TYPE III is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-386-9797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-1222, TYPE III

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026