PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-DTL-1222 TY I GR 2
MIL-DTL-1222 TY I GR 2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.203 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.875 INCHES MINIMUM IN, fastener_length: 1.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-010-8587, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-1222 TY I GR 2
NSN: 5306-00-010-8587
FSC: 5306
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.203 INCHES NOMINAL IN
thread_class2A A
thread_length0.875 INCHES MINIMUM IN
fastener_length1.625 INCHES NOMINAL IN
hardness_rating80.0 ROCKWELL B MINIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.500 INCHES NOMINAL IN
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength75000 POUNDS PER SQUARE INCH LBS
NSN5306-00-010-8587
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MIL-DTL-1222 TY I GR 2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
FASTENER LENGTH: 1.625 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 75000 POUNDS PER SQUARE INCH LBS
•
HEAD STYLE: HEXAGON
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD HEIGHT: 0.203 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.312 INCHES IN
FASTENER LENGTH1.625 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH LBS
HEAD STYLEHEXAGON
FEATURES PROVIDEDFINISHED HEAD
HEAD HEIGHT0.203 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MIL-S-1222Upgraded Successor
successor cross-reference
successor
FFB575Upgraded Successor
successor cross-reference
successor
M1222B2N6C228GCNZEUpgraded Successor
successor cross-reference
successor
45594Interchangeable
interchangeable cross-reference
interchangeable
55099Interchangeable
interchangeable cross-reference
interchangeable
159724Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-DTL-1222 TY I GR 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-1222 TY I GR 2?
MIL-DTL-1222 TY I GR 2 is a BOLT,MACHINE.
What parts can replace MIL-DTL-1222 TY I GR 2?
There are 8 known substitutes for MIL-DTL-1222 TY I GR 2: MIL-S-1222, FFB575, M1222B2N6C228GCNZE and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-1222 TY I GR 2?
MIL-DTL-1222 TY I GR 2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-010-8587. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-1222 TY I GR 2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026