PartsTable
Technical Data Sheet
Download PDF

MIL-DTL-001222L1 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MIL-DTL-001222L1: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: NICKEL OVERALL, thread_class: 2A A, fastener_length: 3.250 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, nominal_thread_diameter: 0.750 INCHES IN, thread_quantity_per_inch: 10. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-037-2768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-001222L1
NSN: 5306-01-037-2768
FSC: 5306 — Bolts
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialNICKEL OVERALL
thread_class2A A
fastener_length3.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch10
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
nondefinitive_spec/std_data1 TYPE
departure_from_cited_documentMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
criticality_code_justificationZZZW
NSN5306-01-037-2768
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MIL-DTL-001222L1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 3.250 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 10
TECHNICAL CHARACTERISTICS
FASTENER LENGTH3.250 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZW
NOMINAL THREAD DIAMETER0.750 INCHES IN
THREAD DIRECTIONRIGHT-HAND
DEPARTURE FROM CITED DOCUMENTMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
NONDEFINITIVE SPEC/STD DATA1 TYPE
THREAD CLASS2A A
THREAD QUANTITY PER INCH10
MATERIALNICKEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 3
MIL-DTL-001222Reference document
Same NSN cross-reference
Reference document — Identification reference
TY1,3/4-10UNC-2AX3 1/4 QQN281Reference document
Same NSN cross-reference
Reference document — Secondary reference
TY1,3/4-10UNC-2AX3 1/4 QQN281L1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MIL-DTL-001222L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-001222L1?
MIL-DTL-001222L1 is a BOLT,MACHINE.
What parts can replace MIL-DTL-001222L1?
There are 3 known substitutes for MIL-DTL-001222L1: MIL-DTL-001222, TY1,3/4-10UNC-2AX3 1/4 QQN281, TY1,3/4-10UNC-2AX3 1/4 QQN281L1. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-001222L1?
MIL-DTL-001222L1 is cataloged in the U.S. Government catalog under NSN 5306-01-037-2768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-001222L1