PartsTable
Technical Data Sheet

MIL-D-39030/3 — DUMMY LOAD,ELECTRICAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MIL-D-39030/3: DUMMY LOAD,ELECTRICAL.

The DUMMY LOAD,ELECTRICAL is a the manufacturer industrial component. Key specifications include power_rating: 0.500 WATTS AVERAGE, body_diameter: 0.360 INCHES NOMINAL IN, cooling_method: SELF-COOLED, overall_length: 0.840 INCHES MAXIMUM IN, overall_diameter: 0.310 INCHES MAXIMUM IN, special_features: STAINLESS STEEL; PASSIVATED; CONNECTOR CONTACT PIN BERYLLIUM COPPER; 2.000 IN. LG CHAIN IN.

This part is cataloged in the U.S. Government catalog under NSN 5985-01-047-6462, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-D-39030/3
NSN: 5985-01-047-6462
NIINs: 010476462, 010694507, 011418027, 011878092, 011920093, 012334304, 012452066, 012549735, 012850439, 013176599, 013562159
FSC: 5985 — Antennas, Waveguides, and Related Equipment
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
power_rating0.500 WATTS AVERAGE
body_diameter0.360 INCHES NOMINAL IN
cooling_methodSELF-COOLED
overall_length0.840 INCHES MAXIMUM IN
overall_diameter0.310 INCHES MAXIMUM IN
special_featuresSTAINLESS STEEL; PASSIVATED; CONNECTOR CONTACT PIN BERYLLIUM COPPER; 2.000 IN. LG CHAIN IN
style_designatorCOAXIAL MOUNTED
termination_typeCONNECTION COAXIAL
precious_materialGOLD
operating_positionALL POSITIONS
connector_end_designFEMALE
fsc_application_dataANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
NSN5985-01-047-6462
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DUMMY LOAD,ELECTRICAL TITLE COMPONENT PN MIL-D-39030/3 MFR DUMMY LOAD,ELECTRICAL
KEY FEATURES
•
OPERATING POSITION: ALL POSITIONS
•
TERMINATION TYPE: CONNECTION COAXIAL
•
OVERALL DIAMETER: 0.312 INCHES NOMINAL IN
•
VOLTAGE STANDING WAVE RATIO: 1.05
•
STYLE DESIGNATOR: COAXIAL MOUNTED
•
COOLING METHOD: SELF-COOLED
•
CONNECTOR END DESIGN: MALE
TECHNICAL CHARACTERISTICS
OPERATING POSITIONALL POSITIONS
TERMINATION TYPECONNECTION COAXIAL
OVERALL DIAMETER0.312 INCHES NOMINAL IN
VOLTAGE STANDING WAVE RATIO1.05
STYLE DESIGNATORCOAXIAL MOUNTED
COOLING METHODSELF-COOLED
CONNECTOR END DESIGNMALE
OVERALL LENGTH0.730 INCHES MAXIMUM IN
IMPEDANCE RATING IN OHMS50.0 NOMINAL
AMBIENT TEMP AT FULL RATED POWER-55.0 CELSIUS AND 125.0 CELSIUS DEGC
SUBSTITUTES & CROSS-REFERENCES 9
587-529-020Reference document
Same NSN cross-reference
Reference document — Secondary reference
3900-1Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
247AS-C0488-002Reference document
Same NSN cross-reference
Reference document — Secondary reference
2001-6113-0Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
GT817AR1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
195701-000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-D-39030/3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-D-39030/3?
MIL-D-39030/3 is a DUMMY LOAD,ELECTRICAL.
What parts can replace MIL-D-39030/3?
There are 9 known substitutes for MIL-D-39030/3: 587-529-020, 3900-1, 247AS-C0488-002 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-D-39030/3?
MIL-D-39030/3 is cataloged in the U.S. Government catalog under NSN 5985-01-047-6462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-D-39030/3