MIL-C-39029/10 — MIL-C-39029/10

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

MIL-C-39029/10: MIL-C-39029/10.

The MIL-C-39029/10 is a the manufacturer industrial component. Key specifications include material: IRON BODY, overall_length: 0.656 INCHES MAXIMUM IN, mounting_method: FORCE FIT, overall_diameter: 0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, special_features: BASIC ITEM IDENTIFICATION NUMBER, BIN-142, style_designator: SOCKET CONTACT. This part is cataloged in the U.S.

Government catalog under NSN 5999-01-089-6597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-C-39029/10

NSN: 5999-01-089-6597
NIINs: 010896597, 010911778, 011773942, 013241758, 014073072, 015303581
FSC: 5999 — Miscellaneous Electrical and Electronic Components
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	IRON BODY
overall_length	0.656 INCHES MAXIMUM IN
mounting_method	FORCE FIT
overall_diameter	0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
special_features	BASIC ITEM IDENTIFICATION NUMBER, BIN-142
style_designator	SOCKET CONTACT
surface_treatment	CADMIUM BODY
mating_contact_width	0.048 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
cable_entrance_diameter	0.062 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
end_item_identification	NSN 4920-01-360-3853; TEST STAND, ENGINE, SEMITRAILER MOUNTED
pin_accommodation_length	0.290 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
identification_code_color	BROWN AND YELLOW AND RED LOCATION NOT OTHERWISE SPECIFIED
NSN	5999-01-089-6597

COMPONENT DIAGRAM

KEY FEATURES

•

PIN ACCOMMODATION LENGTH: 0.290 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN

•

IDENTIFICATION CODE COLOR: BROWN AND YELLOW LOCATION NOT OTHERWISE SPECIFIED

•

OVERALL DIAMETER: 0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN

•

MOUNTING METHOD: FORCE FIT

•

PIN ACCOMMODATION DIAMETER: 0.042 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: SOCKET CONTACT

TECHNICAL CHARACTERISTICS

PIN ACCOMMODATION LENGTH	0.290 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
IDENTIFICATION CODE COLOR	BROWN AND YELLOW LOCATION NOT OTHERWISE SPECIFIED
OVERALL DIAMETER	0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
MOUNTING METHOD	FORCE FIT
PIN ACCOMMODATION DIAMETER	0.042 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
STYLE DESIGNATOR	SOCKET CONTACT
OVERALL LENGTH	0.656 INCHES MAXIMUM IN
SPECIAL FEATURES	BASIC ITEM IDENTIFICATION NUMBER BIN-141
TEST DATA DOCUMENT	81349-MIL-C-39029/10 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
END ITEM IDENTIFICATION	A4 BRADLEY FIGHTING VEHICLE

SUBSTITUTES & CROSS-REFERENCES 5

M39029/10-141Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE AS39029/10Reference document

Same NSN cross-reference

Reference document — Secondary reference

M39029/10 20 20 C4Reference document

Same NSN cross-reference

Reference document — Secondary reference

5999PL0875724Reference document

Same NSN cross-reference

Reference document — Informative reference only

BIN-141Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MIL-C-39029/10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-C-39029/10?

MIL-C-39029/10 is a MIL-C-39029/10. It is classified as a MRO (MRO_GENERAL).

What parts can replace MIL-C-39029/10?

There are 5 known substitutes for MIL-C-39029/10: M39029/10-141, SAE AS39029/10, M39029/10 20 20 C4 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-C-39029/10?

MIL-C-39029/10 is cataloged in the U.S. Government catalog under NSN 5999-01-089-6597. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-C-39029/10 — MIL-C-39029/10

Request a Quote — MIL-C-39029/10