MIL-C-20/36 — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.090 INCHES NOMINAL IN, body_height: 0.290 INCHES NOMINAL IN, body_length: 0.290 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-044-5221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-C-20/36

NSN: 5910-01-044-5221
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.090 INCHES NOMINAL IN
body_height	0.290 INCHES NOMINAL IN
body_length	0.290 INCHES NOMINAL IN
terminal_length	1.250 INCHES MINIMUM IN
special_features	TERMINALS HAVE 0.075 IN. HIGH STANDOFFS IN
terminal_diameter	0.026 INCHES NOMINAL IN
reliability_indicator	ESTABLISHED
end_item_identification	AIRCRAFT ASSY; MV-22A AIRCRAFT A
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_height_from_body	31.8 MILLIMETERS MINIMUM MM
NSN	5910-01-044-5221

COMPONENT DIAGRAM

KEY FEATURES

•

TEST DATA DOCUMENT: 81349-MIL-C-20/36 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 0.0 SINGLE SECTION

•

BODY HEIGHT: 0.090 INCHES NOMINAL IN

•

TOLERANCE RANGE PER SECTION: -5.00 TO 5.00 PERCENT SINGLE SECTION

•

RELIABILITY FAILURE RATE LEVEL IN PERCENT: 1.0000

•

CAPACITANCE VALUE PER SECTION: 10000.000 PICOFARADS SINGLE SECTION

•

MATERIAL: PLASTIC CASE

•

INSULATION RESISTANCE AT REFERENCE TEMP: 100000.0 MEGOHMS

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS (FLIS)

TEST DATA DOCUMENT	81349-MIL-C-20/36 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION
BODY HEIGHT	0.090 INCHES NOMINAL IN
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT	1.0000
CAPACITANCE VALUE PER SECTION	10000.000 PICOFARADS SINGLE SECTION
MATERIAL	PLASTIC CASE
INSULATION RESISTANCE AT REFERENCE TEMP	100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.1500
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)

VERIFIED SUBSTITUTES & CROSS-REFERENCES 7

CC06CG103KInterchangeable