PartsTable
Technical Data Sheet
Download PDF

MHG-1.5-792-B1-0 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MHG-1.5-792-B1-0: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 2.859 INCHES NOMINAL IN, cross-sectional_height: 0.139 INCHES NOMINAL IN, end_item_identification: 1 1/2 INCH NO.792-BH BALLPLEX STRAINER IN, part_name_assigned_by_controlling_agency: MAIN HOUSING O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-478-6940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MHG-1.5-792-B1-0
NSN: 5331-01-478-6940
FSC: 5331 — O-ring
CAGE: 76588 — CORE INDUSTRIES INC. DBA MUELLER STEAM SPECIALTY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter2.859 INCHES NOMINAL IN
cross-sectional_height0.139 INCHES NOMINAL IN
end_item_identification1 1/2 INCH NO.792-BH BALLPLEX STRAINER IN
part_name_assigned_by_controlling_agencyMAIN HOUSING O-RING
NSN5331-01-478-6940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MHG-1.5-792-B1-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.859 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.859 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYMAIN HOUSING O-RING
END ITEM IDENTIFICATION1 1/2 INCH NO.792-BH BALLPLEX STRAINER IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
BN-1.5-792F-BH ITEM 14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MHG-1.5-792-B1-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MHG-1.5-792-B1-0?
MHG-1.5-792-B1-0 is a O-RING.
What parts can replace MHG-1.5-792-B1-0?
There is 1 known substitute for MHG-1.5-792-B1-0: BN-1.5-792F-BH ITEM 14. Substitute compatibility should be verified for your specific system.
What is the NSN for MHG-1.5-792-B1-0?
MHG-1.5-792-B1-0 is cataloged in the U.S. Government catalog under NSN 5331-01-478-6940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MHG-1.5-792-B1-0