PartsTable
Technical Data Sheet
Download PDF

MHCD172 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MHCD172: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, shank_length: 0.500 INCHES NOMINAL IN, overall_height: 1.188 INCHES NOMINAL IN, shank_diameter: 1.875 INCHES NOMINAL IN, style_designator: CHAMFERED FLANGE, chamfer_angle_in_deg: 30.0. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-358-2902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MHCD172
NSN: 5340-00-358-2902
FSC: 5340 — Hardware, Commercial
CAGE: 38460 — LONG-AIRDOX CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
shank_length0.500 INCHES NOMINAL IN
overall_height1.188 INCHES NOMINAL IN
shank_diameter1.875 INCHES NOMINAL IN
style_designatorCHAMFERED FLANGE
chamfer_angle_in_deg30.0
outside/top_flange_diameter2.750 INCHES NOMINAL IN
NSN5340-00-358-2902
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MHCD172 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.875 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 2.750 INCHES NOMINAL IN
•
SHANK LENGTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CHAMFERED FLANGE
•
COLOR: GREEN
•
CHAMFER ANGLE IN DEG: 30.0
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.875 INCHES NOMINAL IN
OVERALL HEIGHT1.188 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER2.750 INCHES NOMINAL IN
SHANK LENGTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORCHAMFERED FLANGE
COLORGREEN
CHAMFER ANGLE IN DEG30.0
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 6
6021177Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2009Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
3-5020Reference document
Same NSN cross-reference
Reference document — Secondary reference
T8505Reference document
Same NSN cross-reference
Reference document — Secondary reference
608505Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10323AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MHCD172?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MHCD172?
MHCD172 is a BUMPER.
What parts can replace MHCD172?
There are 6 known substitutes for MHCD172: 6021177, 2009, 3-5020 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MHCD172?
MHCD172 is cataloged in the U.S. Government catalog under NSN 5340-00-358-2902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MHCD172