MGL100-U6-6 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MGL100-U6-6: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.125 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING HIGH CLINCH SHANK, shank_diameter: 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, shear_strength: 1300 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-514-2933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MGL100-U6-6

NSN: 5320-01-514-2933
FSC: 5320 — Rivets
CAGE: 9K475 — HUCK FASTENERS DBA HUCK INTL INC (USA)

SPECIFICATIONS

material	STEEL COMP 302 SLEEVE
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.125 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING HIGH CLINCH SHANK
shank_diameter	0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
shear_strength	1300 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.486 INCHES NOMINAL IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE SLEEVE
head_major_diameter	0.345 INCHES NOMINAL IN
end_item_identification	HALVORSEN LOADER
NSN	5320-01-514-2933

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.486 INCHES NOMINAL IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.125 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN

•

SHANK STYLE: SELF-PLUGGING HIGH CLINCH SHANK

•

SURFACE TREATMENT: PASSIVATE SLEEVE

•

MINIMUM TENSILE STRENGTH: 950 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
FASTENER LENGTH	0.486 INCHES NOMINAL IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.125 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING HIGH CLINCH SHANK
SURFACE TREATMENT	PASSIVATE SLEEVE
MINIMUM TENSILE STRENGTH	950 POUNDS PER SQUARE INCH LBS
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
SHEAR STRENGTH	1300 SINGLE POUNDS PER SQUARE INCH

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 3

SSC6-6SKLReference document

Same NSN cross-reference

Reference document — Design control — primary reference

624-3104Reference document

Same NSN cross-reference

Reference document — Secondary reference

HRKSS-0606Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy MGL100-U6-6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MGL100-U6-6?

MGL100-U6-6 is a RIVET,BLIND.

What parts can replace MGL100-U6-6?

There are 3 known substitutes for MGL100-U6-6: SSC6-6SKL, 624-3104, HRKSS-0606. Substitute compatibility should be verified for your specific system.

What is the NSN for MGL100-U6-6?

MGL100-U6-6 is cataloged in the U.S. Government catalog under NSN 5320-01-514-2933. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MGL100-U6-6 — RIVET,BLIND

Request a Quote — MGL100-U6-6