PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MG61
MG61 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MOTOR-GENERATOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OVERALL, thickness: 0.065 INCHES NOMINAL IN, hole_diameter: 0.890 INCHES MINIMUM AND 0.892 INCHES MAXIMUM IN, overall_diameter: 1.500 INCHES NOMINAL IN, features_provided: CASEHARDENED, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-6794, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MG61
NSN: 5310-00-275-6794
FSC: 5310
CAGE: 63734 — KAITLIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OVERALL
thickness0.065 INCHES NOMINAL IN
hole_diameter0.890 INCHES MINIMUM AND 0.892 INCHES MAXIMUM IN
overall_diameter1.500 INCHES NOMINAL IN
features_providedCASEHARDENED
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-275-6794
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MG61 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
FEATURES PROVIDED: CASEHARDENED
•
HOLE DIAMETER: 0.890 INCHES MINIMUM AND 0.892 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
THICKNESS: 0.065 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE SHAPE STYLEROUND
FEATURES PROVIDEDCASEHARDENED
HOLE DIAMETER0.890 INCHES MINIMUM AND 0.892 INCHES MAXIMUM IN
OVERALL DIAMETER1.500 INCHES NOMINAL IN
THICKNESS0.065 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MG-61Interchangeable
interchangeable cross-reference
interchangeable
229-0124-000Interchangeable
interchangeable cross-reference
interchangeable
X1251844-1Interchangeable
interchangeable cross-reference
interchangeable
BB27998Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MG61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MG61?
MG61 is a MOTOR-GENERATOR.
What parts can replace MG61?
There are 4 known substitutes for MG61: MG-61, 229-0124-000, X1251844-1 and 1 more. Substitute compatibility should be verified for your specific system.
Is MG61 still available?
MG61 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MG61

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026