PartsTable
Technical Data Sheet
Download PDF

MFF1L0807SCP — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MFF1L0807SCP: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.099 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.259 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN, thread_length: 0.382 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-656-0175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MFF1L0807SCP
NSN: 5305-00-656-0175
FSC: 5305 — Screws
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.099 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.259 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
thread_length0.382 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch32
NSN5305-00-656-0175
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MFF1L0807SCP · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
THREAD LENGTH: 0.382 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.099 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.438 INCHES NOMINAL IN
THREAD LENGTH0.382 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
9054206Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MFF1L0807SCP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MFF1L0807SCP?
MFF1L0807SCP is a SCREW,MACHINE.
What parts can replace MFF1L0807SCP?
There is 1 known substitute for MFF1L0807SCP: 9054206. Substitute compatibility should be verified for your specific system.
What is the NSN for MFF1L0807SCP?
MFF1L0807SCP is cataloged in the U.S. Government catalog under NSN 5305-00-656-0175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MFF1L0807SCP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.