PartsTable
Technical Data Sheet
Download PDF

MF7200-3 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MF7200-3: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.290 INCHES NOMINAL IN, lubrication: DRY FILM LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, nut_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-955-1295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MF7200-3
NSN: 5310-00-955-1295
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.290 INCHES NOMINAL IN
lubricationDRY FILM LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
nut_diameter0.375 INCHES NOMINAL IN
pilot_length0.040 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
pilot_diameter0.311 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
NSN5310-00-955-1295
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MF7200-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
THREAD SERIES: UNF
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.375 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.311 INCHES NOMINAL IN
•
PILOT LENGTH: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
THREAD SERIESUNF
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.375 INCHES NOMINAL IN
PILOT DIAMETER0.311 INCHES NOMINAL IN
PILOT LENGTH0.040 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.290 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
RM52LHC6160-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
9986709-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BACN10NU3FReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MF7200-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MF7200-3?
MF7200-3 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace MF7200-3?
There are 3 known substitutes for MF7200-3: RM52LHC6160-02, 9986709-4, BACN10NU3F. Substitute compatibility should be verified for your specific system.
What is the NSN for MF7200-3?
MF7200-3 is cataloged in the U.S. Government catalog under NSN 5310-00-955-1295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MF7200-3