PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MF6000-04
MF6000-04 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.153 INCHES MAXIMUM IN, nut_length: 0.684 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, plate_width: 0.325 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-208-0822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MF6000-04
NSN: 5310-01-208-0822
FSC: 5310
CAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.153 INCHES MAXIMUM IN
nut_length0.684 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
plate_width0.325 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.025 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedFLOATING NUT
NSN5310-01-208-0822
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MF6000-04 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.153 INCHES MAXIMUM IN
•
NUT MOUNTING PROVISION: STRAIGHT HOLES
•
THREAD CLASS: 3B
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-N-25027 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NUT LENGTH: 0.684 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM BASE TO CENTER OF APERTURE0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
NUT HEIGHT0.153 INCHES MAXIMUM IN
NUT MOUNTING PROVISIONSTRAIGHT HOLES
THREAD CLASS3B
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-N-25027 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NUT LENGTH0.684 INCHES MAXIMUM IN
PLATE THICKNESS0.025 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
600004Interchangeable
interchangeable cross-reference
interchangeable
A910109Interchangeable
interchangeable cross-reference
interchangeable
PL718-05-SECInterchangeable
interchangeable cross-reference
interchangeable
JT91934Interchangeable
interchangeable cross-reference
interchangeable
AS28431Interchangeable
interchangeable cross-reference
interchangeable
820591 FIND 14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MF6000-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MF6000-04?
MF6000-04 is a NUT,SELF-LOCKING,PLATE.
What parts can replace MF6000-04?
There are 19 known substitutes for MF6000-04: 600004, A910109, PL718-05-SEC and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MF6000-04?
MF6000-04 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-208-0822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MF6000-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026