PartsTable
Technical Data Sheet
Download PDF

MF1L0607SCP — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MF1L0607SCP: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.217 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.392 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-656-0174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MF1L0607SCP
NSN: 5305-00-656-0174
FSC: 5305 — Screws
CAGE: 55962 — CARRIER CONSUMER PRODUCTS DIV OF CARRIER CORP (USA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.217 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.392 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch32
NSN5305-00-656-0174
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MF1L0607SCP · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
THREAD LENGTH: 0.392 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.438 INCHES NOMINAL IN
THREAD LENGTH0.392 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
9054205Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MF1L0607SCP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MF1L0607SCP?
MF1L0607SCP is a SCREW,MACHINE.
What parts can replace MF1L0607SCP?
There is 1 known substitute for MF1L0607SCP: 9054205. Substitute compatibility should be verified for your specific system.
What is the NSN for MF1L0607SCP?
MF1L0607SCP is cataloged in the U.S. Government catalog under NSN 5305-00-656-0174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MF1L0607SCP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.