PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MECC430114-4
MECC430114-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.188 INCHES NOMINAL IN, fastener_length: 0.188 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-043-6637, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MECC430114-4
NSN: 5305-00-043-6637
FSC: 5305
CAGE: 74082 — MONMOUTH INDUSTRIES INC (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.188 INCHES NOMINAL IN
fastener_length0.188 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-043-6637
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MECC430114-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
FASTENER LENGTH: 0.188 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110
•
THREAD QUANTITY PER INCH: 40
•
THREAD CLASS: 2A A
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
FASTENER LENGTH0.188 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110
THREAD QUANTITY PER INCH40
THREAD CLASS2A A
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
HEAD HEIGHT0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
HEAD DIAMETER0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
GGG-K-481 TY1CL2Interchangeable
Knife,craftsman's
interchangeable
5110-00-250-8053Interchangeable
Knife,craftsman's
interchangeable
GGG-K-481Interchangeable
Knife,craftsman's
interchangeable
85-2597Interchangeable
interchangeable cross-reference
interchangeable
85-1709Interchangeable
interchangeable cross-reference
interchangeable
SC111-440-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MECC430114-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MECC430114-4?
MECC430114-4 is a SCREW,MACHINE.
What parts can replace MECC430114-4?
There are 18 known substitutes for MECC430114-4: GGG-K-481 TY1CL2, 5110-00-250-8053, GGG-K-481 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MECC430114-4?
MECC430114-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-043-6637. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MECC430114-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026