PartsTable
Technical Data Sheet
MDA801 ✓ Verified by PartsTable
· SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The RECTIFIER,SEMICONDUCTOR DEVICE is a the manufacturer industrial component. Key specifications include material: SILICON, overall_width: 1.290 INCHES NOMINAL IN, overall_height: 0.625 INCHES NOMINAL IN, overall_length: 1.812 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), operating_temp_range: -65.0 TO 150.0 CELSIUS DEGC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-124-9046, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MDA801
NSN: 5961-00-124-9046
FSC: 5961
CAGE: 5V1P1 — ON SEMICONDUCTOR CORPORATION (USA)
SPECIFICATIONS
materialSILICON
overall_width1.290 INCHES NOMINAL IN
overall_height0.625 INCHES NOMINAL IN
overall_length1.812 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
operating_temp_range-65.0 TO 150.0 CELSIUS DEGC
terminal_type_and_quantity4 TAB, SOLDER LUG
circuit_connection_style_designatorBRIDGE 1 PHASE
NSN5961-00-124-9046
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN MDA801 MFR OEM RECTIFIER,SEMICONDUCTOR DEVICE
KEY FEATURES
OPERATING TEMP RANGE: -65.0 TO 150.0 CELSIUS DEGC
TERMINAL TYPE AND QUANTITY: 4 TAB, SOLDER LUG
MOUNTING METHOD: UNTHREADED HOLE(S)
CIRCUIT CONNECTION STYLE DESIGNATOR: BRIDGE 1 PHASE
MATERIAL: SILICON
TECHNICAL CHARACTERISTICS (FLIS)
OPERATING TEMP RANGE-65.0 TO 150.0 CELSIUS DEGC
OVERALL WIDTH1.290 INCHES NOMINAL IN
TERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG
OVERALL HEIGHT0.625 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
CIRCUIT CONNECTION STYLE DESIGNATORBRIDGE 1 PHASE
MATERIALSILICON
OVERALL LENGTH1.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
1906-0008Interchangeable
interchangeable cross-reference
interchangeable
MDA800Interchangeable
interchangeable cross-reference
interchangeable
SDA-10212-8Interchangeable
interchangeable cross-reference
interchangeable
MDA804Interchangeable
interchangeable cross-reference
interchangeable
57-7986Interchangeable
interchangeable cross-reference
interchangeable
DMS 84009BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy MDA801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MDA801?
MDA801 is a RECTIFIER,SEMICONDUCTOR DEVICE.
What parts can replace MDA801?
There are 27 known substitutes for MDA801: 1906-0008, MDA800, SDA-10212-8 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MDA801?
MDA801 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-124-9046. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MDA801