PartsTable
Technical Data Sheet
Download PDF

MD09-10-10-2785 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MD09-10-10-2785: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 2.000 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-906-0870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MD09-10-10-2785
NSN: 5905-00-906-0870
FSC: 5905 — Resistor
CAGE: 04454 — SENSOR SYSTEMS, L.L.C. DBA SENSOR SYSTEMS LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length2.000 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.625 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter0.880 INCHES MAXIMUM IN
lateral_runout0.001 INCHES IN
overall_length2.625 INCHES NOMINAL IN
pilot_diameter0.7500 INCHES MAXIMUM IN
NSN5905-00-906-0870
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN MD09-10-10-2785 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 0.04 INCH-OUNCES IN
•
BODY DIAMETER: 0.880 INCHES MAXIMUM IN
•
LATERAL RUNOUT: 0.001 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 2.785 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION
•
UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE0.04 INCH-OUNCES IN
BODY DIAMETER0.880 INCHES MAXIMUM IN
LATERAL RUNOUT0.001 INCHES IN
ELECTRICAL RESISTANCE PER SECTION2.785 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
UNDERCUT WIDTH0.0570 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER0.650 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
818611Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MD09-10-10-2785?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MD09-10-10-2785?
MD09-10-10-2785 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace MD09-10-10-2785?
There is 1 known substitute for MD09-10-10-2785: 818611. Substitute compatibility should be verified for your specific system.
What is the NSN for MD09-10-10-2785?
MD09-10-10-2785 is cataloged in the U.S. Government catalog under NSN 5905-00-906-0870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MD09-10-10-2785

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.