PartsTable
Technical Data Sheet
Download PDF

MD-35-2 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MD-35-2: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 2.0000 INCHES NOMINAL IN, alignment_type: RIGID, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-305-4389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MD-35-2
NSN: 3110-01-305-4389
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 39317 — MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter2.0000 INCHES NOMINAL IN
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
inner_ring_width1.8593 INCHES NOMINAL IN
outer_ring_width0.5375 INCHES NOMINAL IN
special_featuresITEM HAS SLINGER TO ADD PROTECTION AGAINST RADIANT HEAT
style_designatorSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED ONE SIDE, WITH SETSCREW IN INNER RING
lubrication_materialGREASE
overall_outside_diameter3.9370 INCHES NOMINAL IN
NSN3110-01-305-4389
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MD-35-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.5375 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED ONE SIDE, WITH SETSCREW IN INNER RING
•
OVERALL OUTSIDE DIAMETER: 3.9370 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.5375 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED ONE SIDE, WITH SETSCREW IN INNER RING
OVERALL OUTSIDE DIAMETER3.9370 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
ALIGNMENT TYPERIGID
SPECIAL FEATURESITEM HAS SLINGER TO ADD PROTECTION AGAINST RADIANT HEAT
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MD-35-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MD-35-2?
MD-35-2 is a BEARING,BALL,ANNULAR.
What is the NSN for MD-35-2?
MD-35-2 is cataloged in the U.S. Government catalog under NSN 3110-01-305-4389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MD-35-2