The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_height: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, output_logic_form: RESISTOR-TRANSISTOR LOGIC, inclosure_material: GLASS AND METAL, storage_temp_range: -65.0 TO 150.0 CELSIUS DEGC, operating_temp_range: -55.0 TO 125.0 CELSIUS DEGC, body_outside_diameter: 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-172-4899, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| body_height | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| features_provided | MONOLITHIC AND HERMETICALLY SEALED AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND MEDIUM POWER AND MEDIUM SPEED AND W/ENABLE AND W/CLEAR AND NEGATIVE EDGE TRIGGERED |
| output_logic_form | RESISTOR-TRANSISTOR LOGIC |
| inclosure_material | GLASS AND METAL |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| body_outside_diameter | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| input_circuit_pattern | 4 INPUT |
| inclosure_configuration | CAN |
| terminal_surface_treatment | SOLDER |
| terminal_type_and_quantity | 8 PIN |
| design_function_and_quantity | 1 FLIP-FLOP, J-K, CLOCKED |
| NSN | 5962-00-172-4899 |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -4.0 VOLTS MINIMUM POWER SOURCE AND 4.0 VOLTS MAXIMUM POWER SOURCE |
| MAXIMUM POWER DISSIPATION RATING | 62.0 MILLIWATTS |
| TERMINAL TYPE AND QUANTITY | 8 PIN |
| OUTPUT LOGIC FORM | RESISTOR-TRANSISTOR LOGIC |
| INCLOSURE CONFIGURATION | CAN |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS DEGC |
| BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| INCLOSURE MATERIAL | GLASS AND METAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-99 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| TERMINAL SURFACE TREATMENT | SOLDER |