The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, body_length: 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, features_provided: MONOLITHIC AND POSITIVE OUTPUTS AND MEDIUM SPEED AND W/ENABLE AND MEDIUM POWER AND W/CLEAR AND ASYNCHRONOUS, output_logic_form: RESISTOR-TRANSISTOR LOGIC, inclosure_material: PLASTIC. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-233-7387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| body_width | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN |
| body_height | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN |
| body_length | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN |
| features_provided | MONOLITHIC AND POSITIVE OUTPUTS AND MEDIUM SPEED AND W/ENABLE AND MEDIUM POWER AND W/CLEAR AND ASYNCHRONOUS |
| output_logic_form | RESISTOR-TRANSISTOR LOGIC |
| inclosure_material | PLASTIC |
| storage_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| operating_temp_range | +0.0 TO 75.0 CELSIUS DEGC |
| input_circuit_pattern | 7 INPUT |
| inclosure_configuration | DUAL-IN-LINE |
| terminal_surface_treatment | SOLDER |
| terminal_type_and_quantity | 14 PRINTED CIRCUIT |
| NSN | 5962-00-233-7387 |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| OUTPUT LOGIC FORM | RESISTOR-TRANSISTOR LOGIC |
| OPERATING TEMP RANGE | +0.0 TO 70.0 CELSIUS DEGC |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| DESIGN FUNCTION AND QUANTITY | 2 BUFFER AND 1 FLIP-FLOP, J-K, CLOCKED AND 1 INVERTER, DIGITAL |
| TEST DATA DOCUMENT | 25420-20068 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN |
| TERMINAL SURFACE TREATMENT | SOLDER |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS DEGC |
| BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN |