PartsTable
Technical Data Sheet
Download PDF

MC256 — MC256

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MC256: MC256.

The MC256 is a the manufacturer industrial component. Key specifications include special_features: NHA COMFOX, features_provided: ELECTROSTATIC SENSITIVE, end_item_identification: GENERAL PURPOSE ADP, criticality_code_justification: CBBL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-244-7327, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MC256
NSN: 5340-00-244-7327
NIINs: 002447327, 011740841
FSC: 5340 — Hardware, Commercial
CAGE: Z1BN2 — MILLENNIUM COUPLING COMPANY PTY LTD (AUS)
SPECIFICATIONS
special_featuresNHA COMFOX
features_providedELECTROSTATIC SENSITIVE
end_item_identificationGENERAL PURPOSE ADP
criticality_code_justificationCBBL
NSN5340-00-244-7327
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MC256 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRETCHING/SEALING MACHINE NAME: .NONE
•
STRAPPING WIDTH FOR WHICH DESIGNED: 0.750 INCHES NOMINAL IN
•
SEALING TOOL NAME: .BAND-IT TOOL
•
STRAPPING TYPE FOR WHICH DESIGNED: STEEL
•
SEALING TOOL MODEL NUMBER: NONE
•
SEALING EQUIPMENT FOR WHICH DESIGNED: SEALING TOOL OR STRETCHING/SEALING MACHINE
•
DESIGN TYPE: OPEN
•
EARS: INCLUDED
TECHNICAL CHARACTERISTICS
STRETCHING/SEALING MACHINE NAME.NONE
STRAPPING WIDTH FOR WHICH DESIGNED0.750 INCHES NOMINAL IN
SEALING TOOL NAME.BAND-IT TOOL
STRAPPING TYPE FOR WHICH DESIGNEDSTEEL
SEALING TOOL MODEL NUMBERNONE
SEALING EQUIPMENT FOR WHICH DESIGNEDSEALING TOOL OR STRETCHING/SEALING MACHINE
DESIGN TYPEOPEN
EARSINCLUDED
SURFACE TREATMENTPASSIVATE
WIDTH0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
C25699Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
04248305Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03315926Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MCD4122ITEM7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST256Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
BANDITBUCKLESSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MC256?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MC256?
MC256 is a MC256. It is classified as a MRO (MRO_GENERAL).
What parts can replace MC256?
There are 7 known substitutes for MC256: C25699, 04248305, 03315926 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MC256?
MC256 is cataloged in the U.S. Government catalog under NSN 5340-00-244-7327. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MC256