PartsTable
Technical Data Sheet
Download PDF

MB9525T100S1050T — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MB9525T100S1050T: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 BOLT, overall_width: 1.000 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.050 INCHES NOMINAL IN, loop_inside_diameter: 10.500 INCHES NOMINAL IN, fastening_device_type: T-BOLT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-368-8186, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MB9525T100S1050T
NSN: 5340-01-368-8186
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL COMP 316 BOLT
overall_width1.000 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter10.500 INCHES NOMINAL IN
fastening_device_typeT-BOLT
NSN5340-01-368-8186
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MB9525T100S1050T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: T-BOLT
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 BAND
•
LOOP INSIDE DIAMETER: 10.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPET-BOLT
STYLE DESIGNATORT-BOLT
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 BAND
MATERIALSTEEL CORROSION RESISTING NUT
MATERIALSTEEL COMP 316 BOLT
LOOP INSIDE DIAMETER10.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MB9525T100S1050T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MB9525T100S1050T?
MB9525T100S1050T is a CLAMP,LOOP.
What is the NSN for MB9525T100S1050T?
MB9525T100S1050T is cataloged in the U.S. Government catalog under NSN 5340-01-368-8186. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MB9525T100S1050T