PartsTable
Technical Data Sheet
Download PDF

MB543DDFS428 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MB543DDFS428: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: RUBBER SEAL, bore_diameter: 1.5620 INCHES MINIMUM AND 1.5625 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, outer_ring_width: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-977-2683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MB543DDFS428
NSN: 3110-00-977-2683
NIINs: 009772683, 010367187
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialRUBBER SEAL
bore_diameter1.5620 INCHES MINIMUM AND 1.5625 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.9995 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
material_document_and_classificationMB543ZZ,38443 MFR REF SINGLE MATERIAL RESPONSE SEAL
NSN3110-00-977-2683
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MB543DDFS428 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE BALL
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONMB543ZZ,38443 MFR REF SINGLE MATERIAL RESPONSE SEAL
OVERALL OUTSIDE DIAMETER1.9995 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 2
MS21428-43GSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MB543ZZReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MB543DDFS428?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MB543DDFS428?
MB543DDFS428 is a BEARING,BALL,AIRFRAME.
What parts can replace MB543DDFS428?
There are 2 known substitutes for MB543DDFS428: MS21428-43G, MB543ZZ. Substitute compatibility should be verified for your specific system.
What is the NSN for MB543DDFS428?
MB543DDFS428 is cataloged in the U.S. Government catalog under NSN 3110-00-977-2683. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MB543DDFS428