PartsTable
Technical Data Sheet
Download PDF

MB300-1167 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MB300-1167: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.187 INCHES NOMINAL IN, fork_depth: 0.750 INCHES NOMINAL IN, shank_length: 1.202 INCHES NOMINAL IN, hole_diameter: 0.188 INCHES NOMINAL IN, overall_width: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-332-3895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MB300-1167
NSN: 5340-00-332-3895
FSC: 5340 — Hardware, Commercial
CAGE: U1604 — MARTIN-BAKER AIRCRAFT COMPANY LIMITED (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.187 INCHES NOMINAL IN
fork_depth0.750 INCHES NOMINAL IN
shank_length1.202 INCHES NOMINAL IN
hole_diameter0.188 INCHES NOMINAL IN
overall_width0.312 INCHES NOMINAL IN
overall_height0.374 INCHES NOMINAL IN
fork_span_width0.130 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.091 INCHES NOMINAL IN
rod_connection_bore_depth0.150 INCHES NOMINAL IN
rod_connection_bore_diameter0.188 INCHES NOMINAL IN
NSN5340-00-332-3895
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MB300-1167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.130 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.091 INCHES NOMINAL IN
•
END RADIUS: 0.187 INCHES NOMINAL IN
•
SHANK LENGTH: 1.202 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: S80D,CAGE U1604 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.374 INCHES NOMINAL IN
FORK SPAN WIDTH0.130 INCHES NOMINAL IN
FORK ARM THICKNESS0.091 INCHES NOMINAL IN
END RADIUS0.187 INCHES NOMINAL IN
SHANK LENGTH1.202 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONS80D,CAGE U1604 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.312 INCHES NOMINAL IN
ROD CONNECTION BORE DIAMETER0.188 INCHES NOMINAL IN
ROD CONNECTION BORE DEPTH0.150 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MB300-1167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MB300-1167?
MB300-1167 is a CLEVIS,ROD END.
What is the NSN for MB300-1167?
MB300-1167 is cataloged in the U.S. Government catalog under NSN 5340-00-332-3895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MB300-1167