PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MB1394-1PC26
MB1394-1PC26 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.996 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8864, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MB1394-1PC26
NSN: 5330-00-154-8864
FSC: 5330
CAGE: 20263 — MKT GEOTECHNICAL SYSTEMS (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.996 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-8864
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MB1394-1PC26 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.996 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.500 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
HOUSING BORE DIAMETER2.996 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
6595-8Interchangeable
interchangeable cross-reference
interchangeable
2255-38Interchangeable
interchangeable cross-reference
interchangeable
AT17464Interchangeable
interchangeable cross-reference
interchangeable
6V7918Interchangeable
interchangeable cross-reference
interchangeable
31-1565Interchangeable
interchangeable cross-reference
interchangeable
50115Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MB1394-1PC26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MB1394-1PC26?
MB1394-1PC26 is a SEAL,PLAIN ENCASED.
What parts can replace MB1394-1PC26?
There are 32 known substitutes for MB1394-1PC26: 6595-8, 2255-38, AT17464 and 29 more. Substitute compatibility should be verified for your specific system.
Is MB1394-1PC26 still available?
MB1394-1PC26 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MB1394-1PC26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026