PartsTable
Technical Data Sheet
Download PDF

MATF111A08-7 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MATF111A08-7: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN, head_diameter: 0.294 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-149-1942, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MATF111A08-7
NSN: 5305-01-149-1942
FSC: 5305 — Screws
CAGE: 58845 — ABOUNDING SECURITY INC DIV OF MAA CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
head_diameter0.294 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.760 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
special_featuresINTERNAL DRIVE RIBBED
thread_directionRIGHT-HAND
NSN5305-01-149-1942
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MATF111A08-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 0.760 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH0.760 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
GB510CH08-7Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
122967A08-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy MATF111A08-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MATF111A08-7?
MATF111A08-7 is a SCREW,CLOSE TOLERANCE.
What parts can replace MATF111A08-7?
There are 2 known substitutes for MATF111A08-7: GB510CH08-7, 122967A08-7. Substitute compatibility should be verified for your specific system.
What is the NSN for MATF111A08-7?
MATF111A08-7 is cataloged in the U.S. Government catalog under NSN 5305-01-149-1942. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MATF111A08-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.