PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MATERIAL LIST GH5 ITEM 41
MATERIAL LIST GH5 ITEM 41 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The PLATE,RETAINING,BEARING is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 30.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: BLACK, connection_type: THREADED EXTERNAL TUBE SECOND END, inside_diameter: 0.380 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-396-1010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MATERIAL LIST GH5 ITEM 41
NSN: 3110-01-396-1010
FSC: 3110
CAGE: 08302 — PACCAR WINCH INC DBA PACCAR WINCH DIVISION (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle30.0 DEGREES SECOND END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorBLACK
connection_typeTHREADED EXTERNAL TUBE SECOND END
inside_diameter0.380 INCHES NOMINAL IN
connection_styleINVERTED FLARE SECOND END
outside_diameter0.780 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
NSN3110-01-396-1010
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MATERIAL LIST GH5 ITEM 41 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
SM25849Interchangeable
interchangeable cross-reference
interchangeable
25849Interchangeable
interchangeable cross-reference
interchangeable
39536Interchangeable
interchangeable cross-reference
interchangeable
6CIT-6-8MBX/6-6MBX90-21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MATERIAL LIST GH5 ITEM 41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MATERIAL LIST GH5 ITEM 41?
MATERIAL LIST GH5 ITEM 41 is a PLATE,RETAINING,BEARING.
What parts can replace MATERIAL LIST GH5 ITEM 41?
There are 4 known substitutes for MATERIAL LIST GH5 ITEM 41: SM25849, 25849, 39536 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MATERIAL LIST GH5 ITEM 41?
MATERIAL LIST GH5 ITEM 41 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-396-1010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MATERIAL LIST GH5 ITEM 41

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026