PartsTable
Technical Data Sheet

M8791/1-127 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M8791/1-127: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, center_hole_diameter: 1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN, cross-sectional_height: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR, material_document_and_classification: MIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-380-2479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M8791/1-127
NSN: 5330-01-380-2479
NIINs: 013802479, 014390767
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
center_hole_diameter1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
cross-sectional_height0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-380-2479
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M8791/1-127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: DIAGONAL OVERALL
•
PERIPHERAL DIAMETER: 1.611 INCHES MINIMUM AND 1.617 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
PERIPHERAL DIAMETER1.611 INCHES MINIMUM AND 1.617 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
V3D10158 ITEM 37Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS8791/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS28774-127CPReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-R-8791/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS8791/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
21424-400 FIND 41Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M8791/1-127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M8791/1-127?
M8791/1-127 is a RETAINER,PACKING.
What parts can replace M8791/1-127?
There are 6 known substitutes for M8791/1-127: V3D10158 ITEM 37, SAE-AS8791/1, MS28774-127CP and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M8791/1-127?
M8791/1-127 is cataloged in the U.S. Government catalog under NSN 5330-01-380-2479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M8791/1-127