PartsTable
Technical Data Sheet

M8791/1-111 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M8791/1-111: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 0.543 INCHES NOMINAL IN, center_hole_diameter: 0.520 INCHES MINIMUM AND 0.522 INCHES MAXIMUM IN, cross-sectional_height: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN, end_item_identification: MANIFOLD, PRESSURE REDUCING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-020-9521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M8791/1-111
NSN: 5330-01-020-9521
NIINs: 010209521, 014289150, 015535704
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter0.543 INCHES NOMINAL IN
center_hole_diameter0.520 INCHES MINIMUM AND 0.522 INCHES MAXIMUM IN
cross-sectional_height0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
end_item_identificationMANIFOLD, PRESSURE REDUCING
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-020-9521
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M8791/1-111 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: DIAGONAL OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 0.613 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.443 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER0.613 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.443 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 10
V1D10862 ITEM 29Reference document
Same NSN cross-reference
Reference document — Secondary reference
V3D10233 ITEM 40Reference document
Same NSN cross-reference
Reference document — Secondary reference
V3D10254 TIEM 35Reference document
Same NSN cross-reference
Reference document — Secondary reference
V3C10175 ITEM 15CPReference document
Same NSN cross-reference
Reference document — Secondary reference
V3D10108 ITEM 40Reference document
Same NSN cross-reference
Reference document — Secondary reference
V1D10862 ITEM 29CPReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M8791/1-111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M8791/1-111?
M8791/1-111 is a RETAINER,PACKING.
What parts can replace M8791/1-111?
There are 10 known substitutes for M8791/1-111: V1D10862 ITEM 29, V3D10233 ITEM 40, V3D10254 TIEM 35 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M8791/1-111?
M8791/1-111 is cataloged in the U.S. Government catalog under NSN 5330-01-020-9521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M8791/1-111