M8791/1-013CP — BACK-UP RING,PREFORMED PACKING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M8791/1-013CP: BACK-UP RING,PREFORMED PACKING.

The BACK-UP RING,PREFORMED PACKING is a the manufacturer industrial component. Key specifications include end_item_identification: MANIFOLD, QUIET AIR REDUCING., departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-060-3432, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M8791/1-013CP

NSN: 5330-01-060-3432
NIINs: 010603432, 015518748
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

end_item_identification	MANIFOLD, QUIET AIR REDUCING.
departure_from_cited_document	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification	ZZZW
NSN	5330-01-060-3432

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN

•

CRITICALITY CODE JUSTIFICATION: ZZZW

•

MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR

•

CUT TYPE: DIAGONAL OVERALL

•

DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D

•

PERIPHERAL DIAMETER: 0.559 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN

•

CENTER HOLE DIAMETER: 0.454 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION	ZZZW
MATERIAL DOCUMENT AND CLASSIFICATION	SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE	SQUARE/RECTANGULAR
CUT TYPE	DIAGONAL OVERALL
DEPARTURE FROM CITED DOCUMENT	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER	0.559 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
CENTER HOLE DIAMETER	0.454 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN
MATERIAL	PLASTIC TETRAFLUOROETHYLENE OVERALL

SUBSTITUTES & CROSS-REFERENCES 7

AS8791-013CPSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS28774-013CPSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

V3D10108 ITEM 39CPSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS28774-013Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS8791-013Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS8791/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M8791/1-013CP?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M8791/1-013CP?

M8791/1-013CP is a BACK-UP RING,PREFORMED PACKING.

What parts can replace M8791/1-013CP?

There are 7 known substitutes for M8791/1-013CP: AS8791-013CP, MS28774-013CP, V3D10108 ITEM 39CP and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M8791/1-013CP?

M8791/1-013CP is cataloged in the U.S. Government catalog under NSN 5330-01-060-3432. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M8791/1-013CP — BACK-UP RING,PREFORMED PACKING

Request a Quote — M8791/1-013CP