PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M85049/138-36C
M85049/138-36C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M85049/138-36C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-379-6469, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M85049/138-36C
NSN: 5340-01-379-6469
FSC: 5340
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberM85049/138-36C
NSN5340-01-379-6469
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M85049/138-36C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.360 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
MATERIAL: PLASTIC
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
•
INSIDE DIAMETER LENGTH: 0.560 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.087 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER1.360 INCHES NOMINAL IN
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
INSIDE DIAMETER LENGTH0.560 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.087 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
6971-0014Upgraded Successor
successor cross-reference
successor
MS90376-12RBUpgraded Successor
successor cross-reference
successor
M85049/138-24CUpgraded Successor
successor cross-reference
successor
6972-0012Upgraded Successor
successor cross-reference
successor
M85049/138-22CUpgraded Successor
successor cross-reference
successor
M85049/138-20CUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M85049/138-36C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M85049/138-36C?
M85049/138-36C is a M85049/138-36C.
What parts can replace M85049/138-36C?
There are 17 known substitutes for M85049/138-36C: 6971-0014, MS90376-12RB, M85049/138-24C and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M85049/138-36C?
M85049/138-36C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-379-6469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M85049/138-36C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026