PartsTable
Technical Data Sheet

M85049/138-24B — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M85049/138-24B: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, overall_height: 0.500 INCHES NOMINAL IN, overall_diameter: 0.970 INCHES NOMINAL IN, special_features: RED, part_name_assigned_by_controlling_agency: ELECTRICAL,CAP,DUST, tube_outside_diameter_for_which_designed: 0.775 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-675-6243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M85049/138-24B
NSN: 5340-01-675-6243
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC
overall_height0.500 INCHES NOMINAL IN
overall_diameter0.970 INCHES NOMINAL IN
special_featuresRED
part_name_assigned_by_controlling_agencyELECTRICAL,CAP,DUST
tube_outside_diameter_for_which_designed0.775 INCHES NOMINAL IN
opening_inside_diameter_for_which_designed0.720 INCHES NOMINAL IN
NSN5340-01-675-6243
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M85049/138-24B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.970 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.775 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.720 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.500 INCHES NOMINAL IN
OVERALL DIAMETER0.970 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.775 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.720 INCHES NOMINAL IN
SPECIAL FEATURESRED
PART NAME ASSIGNED BY CONTROLLING AGENCYELECTRICAL,CAP,DUST
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS85049/138Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M85049/138-24B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M85049/138-24B?
M85049/138-24B is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace M85049/138-24B?
There is 1 known substitute for M85049/138-24B: SAE-AS85049/138. Substitute compatibility should be verified for your specific system.
What is the NSN for M85049/138-24B?
M85049/138-24B is cataloged in the U.S. Government catalog under NSN 5340-01-675-6243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M85049/138-24B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.