PartsTable
Technical Data Sheet

M85049/130-36N — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M85049/130-36N: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NEOPRENE OVERALL, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM ALL HOLES IN, overall_width: 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN, overall_height: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN, overall_length: 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-690-1765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M85049/130-36N
NSN: 5330-01-690-1765
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE OVERALL
hole_diameter0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM ALL HOLES IN
overall_width1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
overall_height0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
overall_length1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.750 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
bolt_hole_quantity4
specification/standard_data0U583-AS85049/130 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationAMS3208 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyCONNECTOR ACCESSORIES, ELECTRICAL GASKETING MATERIAL, CONDUCTIVE/NON-CONDUCTIVE, FLANGE MOUNT, CATEGORY 7
NSN5330-01-690-1765
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M85049/130-36N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS3208 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 1.750 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 0U583-AS85049/130 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS3208 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
OVERALL WIDTH1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
APERTURE DIAMETER1.750 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA0U583-AS85049/130 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
BOLT HOLE QUANTITY4
PART NAME ASSIGNED BY CONTROLLING AGENCYCONNECTOR ACCESSORIES, ELECTRICAL GASKETING MATERIAL, CONDUCTIVE/NON-CONDUCTIVE, FLANGE MOUNT, CATEGORY 7
MATERIALRUBBER NEOPRENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
AS85049/130-36NReference document
Same NSN cross-reference
Reference document — Secondary reference
AS85049/130Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS85049/130Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M85049/130-36N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M85049/130-36N?
M85049/130-36N is a GASKET.
What parts can replace M85049/130-36N?
There are 3 known substitutes for M85049/130-36N: AS85049/130-36N, AS85049/130, SAE-AS85049/130. Substitute compatibility should be verified for your specific system.
What is the NSN for M85049/130-36N?
M85049/130-36N is cataloged in the U.S. Government catalog under NSN 5330-01-690-1765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M85049/130-36N

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.