PartsTable
Technical Data Sheet

M85049/130-13M — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M85049/130-13M: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: SILICONE CASE, hole_diameter: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM ALL HOLES IN, overall_width: 1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN, overall_length: 1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.875 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-724-8880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M85049/130-13M
NSN: 5330-01-724-8880
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSILICONE CASE
hole_diameter0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM ALL HOLES IN
overall_width1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
overall_length1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter0.875 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
surface_treatmentSILVER BACKING
bolt_hole_quantity4
cross-sectional_thickness0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
material_document_and_classificationMIL-DTL-83528,TYPE B MIL SPEC SINGLE MATERIAL RESPONSE BACKING
part_name_assigned_by_controlling_agencyCONNECTOR ACCESSORYIES, ELECTRICAL,GASKETING MATERIAL,DONDUCTIVE/NON-CONDUCTIVE,FLANGE MOUNT,CATEGORY 7
surface_treatment_document_and_classificationMIL-DTL-83528,TYPE B MIL SPEC SINGLE TREATMENT RESPONSE BACKING
NSN5330-01-724-8880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M85049/130-13M MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-83528,TYPE B MIL SPEC SINGLE TREATMENT RESPONSE BACKING
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-DTL-83528,TYPE B MIL SPEC SINGLE MATERIAL RESPONSE BACKING
•
APERTURE DIAMETER: 0.875 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-DTL-83528,TYPE B MIL SPEC SINGLE TREATMENT RESPONSE BACKING
CROSS-SECTIONAL THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-DTL-83528,TYPE B MIL SPEC SINGLE MATERIAL RESPONSE BACKING
OVERALL LENGTH1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
OVERALL WIDTH1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
APERTURE DIAMETER0.875 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM ALL HOLES IN
SURFACE TREATMENTSILVER BACKING
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
20015930-83Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS85049/130Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M85049/130-13M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M85049/130-13M?
M85049/130-13M is a GASKET.
What parts can replace M85049/130-13M?
There are 2 known substitutes for M85049/130-13M: 20015930-83, SAE-AS85049/130. Substitute compatibility should be verified for your specific system.
What is the NSN for M85049/130-13M?
M85049/130-13M is cataloged in the U.S. Government catalog under NSN 5330-01-724-8880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M85049/130-13M

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.