The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, overall_width: 0.525 INCHES MAXIMUM IN, overall_height: 1.125 INCHES MAXIMUM IN, overall_length: 1.025 INCHES MAXIMUM IN, special_features: FAILURE RATE 0.1 PERCENT PER 10,000 CYCLES, frequency_in_hertz: 50.0 MINIMUM AND 400.0 MAXIMUM. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5945-01-495-7660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| duty_type | CONTINUOUS |
| coil_quantity | 1 |
| overall_width | 0.525 INCHES MAXIMUM IN |
| overall_height | 1.125 INCHES MAXIMUM IN |
| overall_length | 1.025 INCHES MAXIMUM IN |
| special_features | FAILURE RATE 0.1 PERCENT PER 10,000 CYCLES |
| winding_quantity | 1 |
| frequency_in_hertz | 50.0 MINIMUM AND 400.0 MAXIMUM |
| mounting_slot_width | 0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| end_item_identification | NSN 2350-01-354-5657; CARRIER COMMAND POST |
| environmental_protection | HERMETIC |
| mounting_facility_pattern | IN-LINE SINGLE MOUNTING FACILITY |
| NSN | 5945-01-495-7660 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-PRFM-83536/11-009P GOVERNMENT SPECIFICATION |
| DUTY TYPE | CONTINUOUS |
| WINDING QUANTITY | 1 |
| TEST DATA DOCUMENT | 81349-MIL-PRF-83536 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 8.0 AMPERES DC AND 8.0 AMPERES AC INDUCTIVE LOAD |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 4.0 AMPERES DC AND 4.0 AMPERES AC MOTOR LOAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| MOUNTING SLOT WIDTH | 0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 2.0 AMPERES DC AND 2.0 AMPERES AC LAMP LOAD |
| NONPILE-UP MAIN CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |