PartsTable
Technical Data Sheet
M83513/03-E05C ✓ Verified by PartsTable
· WIRE CABLE
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

The M83513/03-E05C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6150-01-309-8047, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83513/03-E05C
NSN: 6150-01-309-8047
FSC: 6150
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83513/03-E05C
NSN6150-01-309-8047
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: M83513/03-E05C · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
PRECIOUS MATERIAL: GOLD
PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
SURFACE TREATMENT: GOLD FIRST POSITION SHIELD SOLID ALL CONDUCTORS
CONDUCTOR QUANTITY: 31
HEIGHT: 0.906 INCHES NOMINAL ALL CONDUCTORS IN
SPECIFICATION/STANDARD DATA: 81349-MIL-C-83513/3 GOVERNMENT SPECIFICATION
WIDTH: 0.288 INCHES MINIMUM AND 0.300 INCHES MAXIMUM ALL CONDUCTORS IN
PRECIOUS MATERIAL AND WEIGHT: 0.031 GOLD GRAINS, TROY
TECHNICAL CHARACTERISTICS (FLIS)
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
SURFACE TREATMENTGOLD FIRST POSITION SHIELD SOLID ALL CONDUCTORS
CONDUCTOR QUANTITY31
HEIGHT0.906 INCHES NOMINAL ALL CONDUCTORS IN
SPECIFICATION/STANDARD DATA81349-MIL-C-83513/3 GOVERNMENT SPECIFICATION
WIDTH0.288 INCHES MINIMUM AND 0.300 INCHES MAXIMUM ALL CONDUCTORS IN
PRECIOUS MATERIAL AND WEIGHT0.031 GOLD GRAINS, TROY
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT
TEST DATA DOCUMENT81349-MIL-C-83513 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
M83513/03Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83513/3Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-83513/3Interchangeable
interchangeable cross-reference
interchangeable
M83513/03-D03CInterchangeable
interchangeable cross-reference
interchangeable
M83513/03-A03CInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83513Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83513/03-E05C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83513/03-E05C?
M83513/03-E05C is a M83513/03-E05C.
What parts can replace M83513/03-E05C?
There are 11 known substitutes for M83513/03-E05C: M83513/03, MIL-DTL-83513/3, MIL-C-83513/3 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83513/03-E05C?
M83513/03-E05C is cataloged in the Federal Logistics Information System (FLIS) under NSN 6150-01-309-8047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83513/03-E05C