PartsTable
Technical Data Sheet
Download PDF

M83485-345 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M83485-345: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, center_hole_diameter: 3.975 INCHES NOMINAL IN, cross-sectional_height: 0.210 INCHES NOMINAL IN, material_document_and_classification: MIL-R-83485,TYPE-1 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-498-8922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83485-345
NSN: 5331-01-498-8922
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
center_hole_diameter3.975 INCHES NOMINAL IN
cross-sectional_height0.210 INCHES NOMINAL IN
material_document_and_classificationMIL-R-83485,TYPE-1 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-01-498-8922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83485-345 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.210 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83485,TYPE-1 MIL SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 3.975 INCHES NOMINAL IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.210 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83485,TYPE-1 MIL SPEC SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER3.975 INCHES NOMINAL IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
SUBSTITUTES & CROSS-REFERENCES 2
M83485/1-345Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
H643-6503-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M83485-345?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83485-345?
M83485-345 is a O-RING.
What parts can replace M83485-345?
There are 2 known substitutes for M83485-345: M83485/1-345, H643-6503-1. Substitute compatibility should be verified for your specific system.
What is the NSN for M83485-345?
M83485-345 is cataloged in the U.S. Government catalog under NSN 5331-01-498-8922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83485-345

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.