PartsTable
Technical Data Sheet
PartsTable / O-RING / M83485/1-237
M83485/1-237 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83485/1-237 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-483-0822, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83485/1-237
NSN: 5331-01-483-0822
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83485/1-237
NSN5331-01-483-0822
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83485/1-237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-83485 AMENDMENT 3,NOTICE 2/INACTIVE/ GOVERNMENT SPECIFICATION
•
TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 3.335 INCHES MINIMUM AND 3.383 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SPECIFICATION/STANDARD DATA81349-MIL-R-83485 AMENDMENT 3,NOTICE 2/INACTIVE/ GOVERNMENT SPECIFICATION
TEMP RATING-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER3.335 INCHES MINIMUM AND 3.383 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
M83485/1-029Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-83485Interchangeable
interchangeable cross-reference
interchangeable
5331012727464Interchangeable
interchangeable cross-reference
interchangeable
M83485/1-016Interchangeable
interchangeable cross-reference
interchangeable
V0835 2-016Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-83485/1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83485/1-237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83485/1-237?
M83485/1-237 is a M83485/1-237.
What parts can replace M83485/1-237?
There are 20 known substitutes for M83485/1-237: M83485/1-029, AMS-R-83485, 5331012727464 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83485/1-237?
M83485/1-237 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-483-0822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83485/1-237

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026