M83485/1-118 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83485/1-118: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 0.852 INCHES MINIMUM AND 0.872 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: T58 ENGINE, criticality_code_justification: AGAV, material_document_and_classification: AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83485/1-118

NSN: 5331-00-166-1072
NIINs: 001661072, 015092400
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
center_hole_diameter	0.852 INCHES MINIMUM AND 0.872 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification	T58 ENGINE
criticality_code_justification	AGAV
material_document_and_classification	AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
NSN	5331-00-166-1072

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.052 INCHES MINIMUM AND 1.084 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.852 INCHES MINIMUM AND 0.872 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.052 INCHES MINIMUM AND 1.084 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.852 INCHES MINIMUM AND 0.872 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 10

5331PL1995337Reference document

Same NSN cross-reference

Reference document — Informative reference only

A6689.118.269Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M83248/1-118Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS9388-118Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ARP568-118MILG2 3652TY1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS17413-118Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy M83485/1-118?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83485/1-118?

M83485/1-118 is a O-RING.

What parts can replace M83485/1-118?

There are 10 known substitutes for M83485/1-118: 5331PL1995337, A6689.118.269, M83248/1-118 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83485/1-118?

M83485/1-118 is cataloged in the U.S. Government catalog under NSN 5331-00-166-1072. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83485/1-118 — O-RING

Request a Quote — M83485/1-118