PartsTable
Technical Data Sheet
PartsTable / O-RING / M83461/2-914
M83461/2-914 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83461/2-914 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-481-5710, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/2-914
NSN: 5331-01-481-5710
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberM83461/2-914
NSN5331-01-481-5710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/2-914 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
PERIPHERAL DIAMETER: 1.279 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 6.685 INCHES MINIMUM AND 6.765 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TEMP RATING275.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
PERIPHERAL DIAMETER1.279 INCHES NOMINAL IN
CENTER HOLE DIAMETER6.685 INCHES MINIMUM AND 6.765 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
SPECIAL FEATURESPETROLEUM HYDRAULIC FLUID RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
5331PL0813732Interchangeable
interchangeable cross-reference
interchangeable
M83461/2-902Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
AS568-906 MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
3-906N168-80Interchangeable
interchangeable cross-reference
interchangeable
PL-999D0838 PC NO 19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83461/2-914?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/2-914?
M83461/2-914 is a M83461/2-914.
What parts can replace M83461/2-914?
There are 27 known substitutes for M83461/2-914: 5331PL0813732, M83461/2-902, MIL-P-83461 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83461/2-914?
M83461/2-914 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-481-5710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/2-914

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026