PartsTable
Technical Data Sheet

M83461/1-336 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M83461/1-336: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: ORING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-160-4349, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/1-336
NSN: 5331-01-160-4349
NIINs: 011604349, 016753144
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyORING
NSN5331-01-160-4349
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/1-336 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
PERIPHERAL DIAMETER: 3.240 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
PERIPHERAL DIAMETER3.240 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
SPECIAL FEATURESMATERIAL IS RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL.HARDNESS RATING IS 72.0 SHORE DUROMETER A MINIMUM AND 78.0 SHORE DUROMETER A MAXIMUM.
CENTER HOLE DIAMETER2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
AMS-P-83461/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS83461/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MIL-P-83461/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy M83461/1-336?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/1-336?
M83461/1-336 is a O-RING.
What parts can replace M83461/1-336?
There are 3 known substitutes for M83461/1-336: AMS-P-83461/1, SAE-AS83461/1, MIL-P-83461/1. Substitute compatibility should be verified for your specific system.
What is the NSN for M83461/1-336?
M83461/1-336 is cataloged in the U.S. Government catalog under NSN 5331-01-160-4349. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/1-336

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.